Asphalt Body Cars

Body Cars is a bitumous coating used to insulate and protect the underbody of vehicles. It forms a flexible, moisture and water-resistant layer that helps protect the chassis from rust and corrosion caused by weather conditions. It also contributes to absorbing road noise and vibrations, enhancing the durability of the body and extending its lifespan.

Category: Sealants

Technical specifications

• Product type: Asphalt Body Cars

• Packaging: 4-litre US gallon / 1-litre can — Storage: 4 gallons per carton / 12 cans per carton

• Available Colors: Black – White

• Initial drying time: 1-2 hours

• Full drying time: 24 hours

• Shelf Life: Unlimited

Application steps

1. First: Surface Preparation Thoroughly clean the vehicle's underbody of dust, mud, grease, and oils using water and detergents, then allow it to dry completely. Remove any existing rust using a wire brush.

2. Second: Protecting Sensitive Parts Cover the parts that should not be coated—such as the exhaust system, engine, shock absorbers, and brakes—using paper and masking tape to protect them from paint overspray.

3. Third: Product Preparation Shake the container well for several minutes before use to ensure the material is completely homogenous. If the product requires dilution, add the appropriate solvent according to the manufacturer's instructions.

4. Fourth: Application Method Apply the coating using a specialized underbody spray gun from a distance of 20–30 cm, or apply it with a brush in tight, narrow spaces, ensuring an even and thick layer is achieved.

5. Fifth: Product Drying Allow the first coat to dry initially. A second coat can be applied if needed to increase protection. It is recommended not to move the vehicle until the coating is completely dry (within 12–24 hours).