inverter felicity IVEM8048 - 48v - 8kw
felicity
Category :
SPECIFICATIONS
|
Line Mode Specifications |
|
|
Model |
IVEM8048 |
|
Rated Output Power |
8000VA |
|
8000W |
|
|
Nominal DC Input Voltage |
48V |
|
Input Voltage Waveform |
Sinusoidal (utility or generator) |
|
Nominal Input Voltage |
230Vac |
|
Low Line Voltage Disconnect |
170Vac±7V(UPS); 90Vac±7V(Appliances) |
|
Low Loss Voltage Re-connect |
180Vac±7V (UPS); 100Vac±7V(Appliances) |
|
High Line Voltage Disconnect |
280Vac±7V |
|
High Line Voltage Re-connect |
270Vac±7V |
|
Max AC Input Voltage |
280Vac |
|
Nominal Input Frequency |
50Hz / 60Hz (Auto detection) |
|
Low Line Frequency Disconnect |
40±1Hz |
|
Low Line Frequency Re-connect |
42±1Hz |
|
High Line Frequency Disconnect |
65±1Hz |
|
High Line Frequency Re-connect |
63±1Hz |
|
Output Voltage Waveform |
As same as input waveform |
|
Output Short Circuit Protection |
Line mode:Circuit Breaker Battery mode:Electronic Circuits |
|
Efficiency (Line Mode) |
>95% (Rated R load, battery full charged) |
|
Transfer Time(Single unit) |
10ms typical (UPS);20ms typical (Appliances) |
|
Transfer Time(Parallel) |
50ms typical |
|
Pass Through Without Battery |
Yes |
|
Max. Bypass Overload Current |
53A |
|
Max.Inverter / Rectifier Current |
40A / 8000W |
|
Utility Charge Mode Specifications |
|
|
Nominal Input Voltage |
230Vac |
|
Input Voltage Range |
90~280Vac |
|
Nominal Output Voltage |
Dependent on battery type |
|
Max. Charge Current |
150A |
|
Charge Current Regulation |
10-150A (Adjustable unit is 1A) |
|
Over Charge Protection |
Yes |
|
Solar Charging &Grid Charging |
|
|
Max.PV Open Circuit Voltage |
500V |
|
PV Voltage Working Range |
90V-450V |
|
Max.Input Power |
10000W(5000W for single Pv) |
|
Max. Solar Charging Current |
150A |
|
Max, Charging Current (PV+Grid or GEN ) |
150A |
|
Max. Input Current |
20Ax2 (MAX 40A) |
|
Min. Startup Voltage |
100V |
